|
SPECIFICATION |
LADYBUG3 |
|
Image Sensor Type |
six (6) Sony progressive scan color CCDs (five in horizontal ring, one on top) |
|
Image Sensor Model |
Sony 2.0 MP 1/1.8” ICX274 |
|
Maximum Resolution |
1600(H) x 1200(V) (each sensor) |
|
Shutter Type |
global shutter |
|
Analog-to-Digital Converter |
Analog Devices 12-bit ADC |
|
Video Data Output |
8-bit raw Bayer (color) digital data |
|
Digital Interface |
9-pin 1394b (FireWire) 800Mb/s interface for camera control, power and video data
locking screws guarantee secure connection |
|
Maximum Frame Rate |
15 FPS JPEG compressed 6.5 FPS uncompressed |
|
Partial Image Modes |
region of interest modes via Format_7, programmable via software |
|
Optics |
six (6) high quality 3.3 mm focal length microlenses |
|
Triggering |
GPIO and software |
|
Camera Settings Control |
shutter, gain, white balance, gamma and JPEG compression, are programmable via software |
|
Voltage Requirements |
8-30 V, via the IEEE-1394b interface |
|
Power Consumption |
7.2 W at 12 V |
|
Case Material |
machined aluminum housing, anodized red or black |
|
Case Type |
single unit, water resistant |
|
Dimensions (L x W x H) |
122 mm x 141 mm |
|
Mass |
2416 g |
|
Camera Status |
status LED to indicate power and device connection |
|
Camera Specification |
IIDC 1394-based Digital Camera Specification v1.31 |
|
Emissions Compliance |
complies with CE rules and Part 15 Class A of FCC Rules |
|
Operating Temperature |
0° to 45°C (-30° to 60°C storage) |
|
Warranty |
1 year |
Development Kit Contents
The following items are included in the Ladybug3 Development Accessory Kit DEVKIT-01-0004:
- FWB-PCIE-01: single bus 1394b PCI Express card
- ACC-01-2017: 10 meter 1394b cable
- FWB-EC-2PORT: 1394b ExpressCard for notebooks / laptops
- ACC-01-9003: power supply for ExpressCard
- ACC-01-3005: 4.5 meter GPIO wiring harness
- ACC-01-0012: 4-Legged Desktop mount
- ACC-01-0013: tripod adapter
- Ladybug3 Getting Started Manual
- Ladybug SDK (C/C++ API and device drivers) CD
Emissions and RoHS Compliance
FCC / CE Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
RoHS / WEEE Compliance
This product is RoHS and WEEE compliant.
*NOTE: The DEVKIT-01-0004 will be included at no charge when purchasing between 1-10 cameras
| Part Number |
Description |
| LD3-20S4C-33 |
1600 x 1200 Ladybug3 Spherical Digital Video Camera, Red |
| LD3-20S4C-33B |
1600 x 1200 Ladybug3 Spherical Digital Video Camera, Black |
| DEVKIT-01-0004 |
Ladybug3 Development Accessory Kit |
View Image Stabilization Demo
